Some of the tips of the shelf installation: 1. open the hook box, you will find a transparent bag, which is required for the installation of six angle wrench, screw and other accessories, inner six angle wrench is used in upper and lower column connecting the screw and other accessories for the installation of light boxes and cabinets and posts. 2., here I would like to point out: column connections. In the past, some guests had to install the six angle screws on the connecting piece and install them from outside the column for the first time, so the installation is not right.
Shelf installation of some of the small skills:
1., when you open the hook box, you will find a transparent self sealing bag. There are accessories for installing six inner wrenches, screws and so on. The six angle wrench is used for connecting the upper and lower columns. Screws and other accessories are used for installing light boxes and connecting columns and cabinets.
2. special mention here: column connections, past some guests for the first time will be installed on the connecting piece six angle screw out from the outside to the fixed column, it was wrong to install, our design is based on the principle of customer convenient installation, connection screws do not need to spin out, just plug the next column within half of the position with six angle wrench screw, and then insert the column is screwed tightly, the screw position just to post a slot. It is important to note that the screw must be in place, so when the panel is installed, the panel's hook will not meet the screw so that the panel can not be inserted into the column slot.
The 3. hole rack, middle hole plate has a hole on the back of the orifice and the orifice is used for connecting the display, after the installation is completed, only the display ration of screw and nut two hole plate from the back connection, can guarantee the smooth and strengthen the load-bearing panel display products.
4. light box type rack is generally installed in the column within, so you can avoid sending, not damage, when installed, only one type of lamp is removed from the post, directly into the box slot plug can be inserted. Because of the energy-saving lamp, it will not be particularly bright when it is opened, but it will be good in a few minutes. (if there is a problem that the connection part of the power line is found in the installation, in order to ensure safety, do not use it, contact us in time.)
5. Before the installation of doors 5. key cabinet rack with tape on the bottom side of the door, and should be the first from the bottom out of all components, and then took out the key to open the door, remove the hook inside the box to install the required screw and the inner six angle wrench. It's added that: for convenience of management, all the key of the cupboard door is all in common now, and it doesn't bother because the key is exchanged.
6. and if encountered uneven ground, can be adjusted by the screw at the bottom of the column to adjust the height of the display, in order to achieve the best balance display rack.
PREV：没有了
Copyright @ 2009-2019 Jiangsu Nobei storage shelf Manufacturing Co., Ltd.
The company has been occupying a leading position in the storage shelf market, specializing in storage shelf, logistics system, three-dimensional warehouse planning, storage equipment design, manufacturing and installation, with a professional design team, striving to build Jiangsu nobe storage shelf Manufacturing Co., Ltd. into a first-class storage shelf provider.
